M-2000 CAPSTAN
NEW EQUIPMENT WARRANTY

Superior-Lidgerwood-Mundy Corp. (hereinafter " SLM ") warrants any product manufactured by SLM to be of proper materials and good workmanship. To facilitate the prompt action on all warranty claims a buyer's purchase order is required at the time of the initial claim notification. No charges will be billed against a warranty claim purchase order prior to final determination of warranty applicability. In discharge of this warranty the seller will furnish without charge, or will repair, a similar part to replace any material of the seller's manufacturer which within one year after shipment from SLM is proven to our satisfaction to have been defective at the time it was shipped provided that: (1) the said product was installed and used in accordance with SLM 's Operation and Maintenance Manual procedures and any other specifications or directions of SLM , (2) said product was stored and maintained in good factory condition until commencement of service and at all times thereafter was properly used, maintained and serviced, (3) written notice of the claimed defect is given to SLM immediately upon discovery thereof, (4) the buyer has not attempted to repair, alter, or dismantle SLM 's equipment without SLM 's prior authorization, (5) the defective part is returned, shipping charges prepaid to a location designated by SLM , (6) inspection of the original part establishes the existence of the claimed defect to the satisfaction of SLM . Failure to comply any of the above conditions with the above will result in the forfeiture of buyer's right to warranty claims.

Any replacement part supplied by SLM is warranted for 120 days from the date of shipment from SLM or for the remaining equipment warranty period, whichever is longer. SLM shall not be held liable for claims for consequential or special damages or expenses incurred for customer repairs, for delays, or otherwise unless specifically agreed to in writing. This warranty is given in lieu of all other warranties, express or implied , of merchantability or of fitness for a particular purpose and constitutes the only warranty made by SLM . Component parts, materials and equipment not manufactured by SLM are warranted only to the extent that they are warranted by the supplier to SLM . SLM makes no warranty whatsoever, either express or implied, of merchantability or fitness for purpose, or otherwise, as to any defect in design on any products or parts thereof.

CAPSTAN & ANCILLARY EQUIPMENT STORAGE PROCEDURES

• During any storage period the equipment must be protected from moisture, dust, dirt, and other corrosive environments.
• The capstans shall be rotated, for a minimum of ten minutes, each month and a dated signed (by a designated qualified person) log of such action, be maintained for the warranty period.
• Also monthly, the lubricating oil shall be inspected for correct level, contamination and moisture, if either is found the unit shall be drained and refilled, prior running.
• The lubricating oil shall be drained and refilled before the unit is put into operation.